Dock Door Calculator: How Many Loading Docks Do You Need?
Enter your daily truck volume, dock time per truck and operating hours. See how many dock doors your site needs, how many booking slots each door gives you, and whether your busiest hour fits.
Your site needs
- Carriers book their own time slot, so arrivals stop bunching at shift start
- Live ETAs move a late truck to a free door before it blocks the plan
- Measured dock times replace guesses when you size the next site
Free for your carriers · live in ~7 weeks · one platform
Estimates are indicative and based on the figures you enter. Mixed fleets, live versus drop-trailer loads and handling equipment change real dock times.
What you need to enter
- Trucks per day. Count every vehicle that needs a door: inbound deliveries, outbound collections and returns. If you run separate inbound and outbound docks, run the calculator once for each.
- Average dock time per truck. The time a door is occupied, from the truck docking to the door being free again. Include positioning, paperwork and the gap before the next truck can back in. A full live-unloaded trailer typically takes 45 to 90 minutes; a pre-loaded drop trailer swap is far shorter.
- Operating hours. The hours your docks can actually receive or dispatch trucks, not the hours the building is open.
- Busiest-hour share. The percentage of the day's trucks that arrive in your peak hour. If 12 of 80 trucks arrive between 06:00 and 07:00, that is 15%. Without slot booking this figure is usually far above an even spread.
- Target utilisation. No door can run at 100% without a queue forming. Most sites plan for 75% to 85% so there is room for early, late and slow trucks.
How the dock door number is calculated
The calculator uses occupancy: how many door-hours your trucks consume, divided by the door-hours you have.
Busiest-hour doors = trucks in the busiest hour Ă dock time (h) Ă· target utilisation
Doors you need = the higher of the two, rounded up
The average tells you whether the site has enough capacity over a day. The busiest hour tells you whether trucks will queue at the gate. Most sites that feel short of doors pass the first test and fail the second.
Why the busiest hour decides the number of doors
Arrivals are rarely spread evenly. Carriers aim for the start of a shift, drivers who left early arrive together, and retail or production cut-off times pull trucks into the same window. A site with enough doors on average can still have a queue every morning. The gap between your average and your busiest-hour result is the capacity you are holding only to absorb uncoordinated arrivals.
That gap is what time slot management removes: when carriers book a slot, the busiest hour flattens and the number of doors you need moves towards the average.
From the number to booking slots and rules
Once you know your doors, the slot grid follows. Each door gives you operating hours divided by dock time in slots per day, and the slot length should match the real dock time for each load type, not one fixed length for every truck. The next step is deciding which carriers can book which doors and when; our guide to dock door scheduling rules covers that. To run the grid every day with live arrival data, see dock scheduling software.
How to use this calculator
Enter your volume
Trucks per day and how long each one occupies a door.
Add hours and peak
Operating hours, your busiest-hour share and the utilisation you want.
Calculate
See the doors you need, your slot capacity and whether the peak fits.




